View source

From G-Shock Wiki | casio watch resources

You do not have permission to do that, for the following reasons:

• This page has been locked to prevent editing.
• The action you have requested is limited to users in the group user.

You can view and copy the source of this page:

Most G-Shock models have resin bands that are held in with spring bars. To have a cloth or zulu style band a G-Shock needs two plastic or resin strap adapters that the strap can be fed through. Resin bands are limited to certain sizes by the spacing of the holes. While nylon cloth straps can be more widely adjusted since the a secured with Velcro or a different type of buckle. ==Online Sources for Genuine Casio Replacement Bands== http://mygshock.com/wiki/Parts%2C_Tools%2C_and_Supplies#Casio_Parts_Dealers ==NATO Strap & Adapters FAQ== ===Which G-Shocks are compatible with strap adapters?=== * [[DW-003]] * [[DW-004]] * [[DW-5000]] (reissues and variants) * [[DW-5200]] * [[DW-5300]] * [[DW-5600C]] * [[DW-5600E]] * [[DW-6100]] * [[DW-6200]] * [[DW-6500]] * [[DW-6600]] * [[DW-6900]] * [[DW-9052]] * [[G-5600]] * [[G-5700]] * [[GW-200]] [[Frogman]] (GW-225 and variants) * [[GW-5600]] - County Comm adapters don't work well at all on this model ====Notes==== * Any G-Shock that can accept a standard 16mm spring bar should be compatible. * End pieces (aka strap adapters) for 5xxx series: Casio part #74243710 ===How are strap adapters attached to the module?=== * Most strap adapters use a spring bar, just like a resin band. ===Where can I buy Nato/Zulu/Maratec bands or straps?=== * http://www.countycomm.com/zulu.htm * http://www.countycomm.com/BANDS.htm * http://www.broadarrow.net/maratac.htm * http://www.westcoastime.com/newzulbanare.html * http://www.strapfactory.com/military.htm ===Where can I buy strap adapters to use with Nato/Zulu/Maratec bands?=== * If you live in the US call Casio at 1-800-223-2001. Just ask for end-pieces for the DW-5600EB (Casio part #74243710), they cost $2 USD each as opposed to the $12 everyone else charges. * http://www.countycomm.com/adapter.htm * http://www.broadarrow.net/maratac.htm * http://www.westcoastime.com/gshocadcasfo.html * Note: there are some Official Casio parts, and also third party ones. Both will work, but there is a slight difference between the two. ===What is the best size strap to fit the genuine Casio strap adapters?=== * 22mm or 24mm will fit, but the 24mm fills the width better. ===Can you put a zulu strap on a G-5500?=== * Short answer: You can't use the Zulu adapter on a 5500. * Long answer: You can't really use the Zulu adapter on a 5500. Well, you can, but the problem is that the supplied resin band is an integrated part of the bezel. If you take the band off, then there's nothing to secure the bezel to the watch body, so it can just flop about (and be ripped off the watch quite easily). I sacrificed a resin strap to make this work. I cut the little lugs off the ends of the strap, and used them on their own purely to hold the bezel on to the case. Then I attached the Zulu adapters. That makes it sound easy; it's actually quite a fiddly job, though once you get practise you can do it in a few seconds. Anyway, the result looks like this: [[Image:G-5500-zulu-adapter.jpg]] by Pat Galea ===How do you fix a loose strap adapter on a Frogman?=== * A quick solution to fix this is take apart a cheap bic pen, cut a piece off of the end of the ink refill, then slice with a razor two slim collars that you can use to take up the free space on your spring bars. -Kdarmy ==Mil-Shock Mod: How-to Guide with Photos== * [[Mil-Shock DIY Modification]] - modify an ordinary G-Shock to accept an extra-wide zulu band. ==Adjusting Metal Bracelet Bands== [http://www.pmwf.com/Watches/WatchSchool/WS%2014%20How%20to%20Resize%20Common%20Bracelets/WS%2014%20How%20to%20Resize%20Bracelets.htm#Screwed%20pin%20bracelets How to resize a metal watch band] - Tutorial with pics that shows how to adjust and re-size metal watch bands with links. ==How to Fix a Loose Strap Holder== Here's how you get the strap keeper to better hold on, so the band doesn't slip out all the time: I took a pair of pliers and put pressure on the keeper flattening it out and put the blow dryer to it. I then cooled it off while still applying the pressure and she now holds tight and doesn't move at all. The best thing is you don't even notice that anything was done to the keeper. -falcon4311

Return to Main Page.